SpeedMill PLUS Series Sample Homogenization. Powerful and Reproducible.

  • Entire and reproducible homogenizing of up to 20 samples
  • Efficient sample cooling during the whole preparation without need for cost-intensive consumables
  • Flexible homogenizing system for various starting materials

Achieving high quality results starts with careful sample preparation including efficient and reproducible sample homogenization. The SpeedMill PLUS meets these requirements and forms the foundation for your successful analysis.

Maximum Access. Minimum Effort.

The homogenization process by SpeedMill PLUS is based on an innovative double action technology - a mechanical principle for which a patent has been filed. This new process allows users to operate the SpeedMill PLUS continuously if necessary, whereby efficient sample cooling is facilitated by the holder, which can be stored at down to -80 °C. The compact design, intuitive use interface and availablity of pre-defined protocols are decisive for the ease of use.

  • Innovative double action technology
  • Passive sample cooling to -80°C
  • Pre-defined protocols
  • No acceleration/deceleration times
  • Compact design and minimal footprint

Download Product Information

SpeedMill PLUS - Homogenizer of Choice

The SpeedMill PLUS is a highly efficient homogenization system for various starting materials used for the subsequent isolation and purification of DNA, RNA or proteins. The homogenization process is based on an innovative mechanical principle for which a patent has been filed. This new process allows users to operate the SpeedMill PLUS continuously if necessary. The high efficiency of energy input into the sample, based on a vertical movement, procures a homogeneous disruption of the sample without destroying the target molecules.

Efficient sample cooling: prior, during and after preparation

For the optimized sample holder, which is used inside the SpeedMill PLUS, different temperature ratings are freely selectable due to the storage down to –80 °C. According to this an efficient sample cooling during the whole homogenization process is warranted and the substantial sample warming that occurs with other homogenizers is prevented. The often problematic handling of liquid nitrogen or dry ice is thus a thing of the past. Additionally the considerably expense factor of this additives, which have to be loaded continuously, is not applicable. Besides the sample holder allows an easy transport of the sample tubes and a long term storage of starting or homogenized material at adequate temperatures.

Modern preparation of samples: SpeedMill PLUS

The samples to be processed are rapidly and efficiently homogenized in Lysis Tubes that have been specially optimized for the system and, as such, contain different and/or application-specific beads. Using beads makes it possible to completely and reproducibly homogenize even the toughest starting materials, such as cartilage and chitin shells of insects or ticks within a very short time. 2.0 ml and 0.5 ml containers (Lysis Tubes) with different beads are available for sample preparation, allowing users to adapt sample processing to a diverse range of soft and hard starting materials. Operating processes, such as loading and removing of the sample tubes, are very simple and no tools are required. In addition userdefined protocols can be entered and saved as well as pre-installed programs are available. Homogenization parameters, like time and using cyclic routines are freely selectable.

Innovative technology for outstanding results

Digestion using SpeedMill PLUS is based on an innovative, patented mechanical principle and ensures highly efficient energy input. Based on a vertical movement, the process also ensures that the samples are homogeneously digested without destroying the target molecules.

Products

Applications

Environment

Show applications

Applications

  • Complete Wastewater-based Epidemiology (WBE) Workflow for detection of SARS-CoV-2via RT-qPCR (EN)

    Open application

Technical Data

Homogenization time

Programmable homogenization step

Number of cycles

Protocol steps

Storable protocols

User-defined protocols

Sample capacity

Pre-programmed protocols

Acceleration time

Steps of adjusting time

Device handling

Deceleration time

Sample cooling

Sample handling

Homogenization routines

Dimension (width x depth x height)

Space requirement (width x depth x height)

SpeedMill PLUS 110 V
845-00007-4

30 sec to 4 min (depending on the starting material) 1 sec to 4:59 min 1-99 1-6 20 Yes Up to 20 samples simultaneously Yes No acceleration 1 s Stand-alone device, simple starting and handling of device by using modern touch sensors No deceleration Passive cooled sample holder
storage at temperatures down to –80 °C
Simple sample tube loading and removal User-defined programming with user-defined parameters, pre-programmed protocols 154 mm x 257 mm x 275 mm 155 mm x 310 mm x 420 mm

SpeedMill PLUS 230 V
845-00007-2

30 sec to 4 min (depending on the starting material) 1 sec to 4:59 min 1-99 1-6 20 Yes Up to 20 samples simultaneously Yes No acceleration 1 s Stand-alone device, simple starting and handling of device by using modern touch sensors No deceleration Passive cooled sample holder
storage at temperatures down to –80 °C
Simple sample tube loading and removal User-defined programming with user-defined parameters, pre-programmed protocols 154 mm x 257 mm x 275 mm 155 mm x 310 mm x 420 mm

Order Information

Order number

Description

845-00007-4 SpeedMill PLUS 110 V
845-00007-2 SpeedMill PLUS 230 V

Accessories

Sample holder P20 (aluminum, black) 845-60053-0
Set sample holder P20 (aluminum, black) 845-60055-0
Tubefixation for SpeedMill PLUS 845-60054-0
Set Tubefixierung für SpeedMill PLUS 845-60056-0

Downloads

Biosurveillance in Wastewater (EN)
Brochure Homogenizer SpeedMill PLUS (EN)
Brochure Product Guide Extraction (EN)
Brochure Product Guide Life Science (EN)
Broschüre Homogenisator SpeedMill PLUS (DE)
Broschüre Produktführer Life Science (DE)
Operating Manual SpeedMill PLUS (DE)
Operating Manual SpeedMill PLUS (EN)
Tech Note WW SMP
Überwachung biologischer Parameter in Abwässern (DE)

Lysis Tubes including prefilled homogenization beads as consumables for SpeedMill PLUS

With the transfer of AJ Innuscreen to IST AG, the business with kits and reagents also shifts. Please note that extraction kits are now only available from IST Innuscreen GmbH. From now on you can send your orders to order.innu@ist-ag.com or send your questions to info.innu@ist-ag.com.

Visit product page on ist.innuscreen.com

Contact us We are happy to help you and will contact you as quickly as possible.