The Group Analytik Jena AG AJZ Engeineering GmbH AJ Cybertron GmbH AJ Blomesystem GmbH AJ Roboscreen GmbH AJ Innuscreen GmbH Branch Eisfeld analytical solutions bioanalytical solutions project solutions optical solutions
  Deutsch | English Home  | AJ International | Sitemap | Print
 
 



Accessories for special applications

Especially in UV VIS spectroscopy, it is essential to have a wide range of accessories that make your spectrophotometer applicable to many different kinds of analytical jobs and provide further automation. Whether cell holders, cell changers, flowcell systems, reflectance accessories or fiber coupling. Choose the right system for your individual analytical needs. 
 
Cell Holders
Reflectance attachments
Cell changer
Fibre coupling
Sample feeding
Dissolution
Validation Kit


Cell Holders
Holder for cylindrical
cells
Holder for cylindrical cells with/without thermostating

Holder for solid samples
Holds foils, sample plates or similar solid samples for transmittance measurements

    

Thermostated and adjustable HPLC cell holder
Suitable for HPLC microcells of 1 cm pathlength

Adjustable cell holder for microcells
Accommodates micro- and ultramicrocells of small volumes
    

Cell holder for cells of up to 10 cm pathlength
Provides measurement of strongly diluted samples or minimum concentrations in standard cells of up to 10 cm pathlength


Peltier-thermostated cell holder  for the ranges from -10° C to 105° C; accurate to 0.1° C (at 25° C room temperature) Designed for DNA melting studies and the measurement of enzyme kinetics, temperature sensor
    
Holder for round cells
Accommodates round cells or ampoules with a diameter of 11 to 16 mm		 

Thermostated cell holder for 1 cm (or 5 cm) cells (optionally with stirrer)
Excellently suitable for enzyme kinetics and other thermally dependent reactions

Complete range of cells
Micro, Semi-micro or Macro cells we offer you for all Applications the suitable cells

 top


Reflectance attachments
Absolute Reflectance Attachment
V/W optical configuration for the determination of the reflectance at plane surfaces and layers
11° - 60° variable angle reflectance attachment
For the examination of solid surfaces, film systems and their interfaces
Reflectance attachment with spectralon integrating sphere
For transmittance and reflectance measurements of solid, powdery and liquid samples

 top


Cell changer
Thermostated 6-cell changer with stirrer and 6 positions
for 1-cm cells /Temperature control through water bath or Peltier element Specially designed for quantitative end-point determination and enzyme kinetics
Cell changer for cells of 1, 2 or 5 cm pathlength
( not thermostated and thermostated for cells of 1-cm path length ) Especially suitable for quantitative determinations

Cell carousel*
For maximum sample throughput in quantitative analysis

8-cell changer or double 8-cell changer*
8-cell changer or 2x changer combination (with and without stirrer), not thermostated, water thermostated or peletier thermostatefor cells of 1 cm pathlength
 
Cell carousel with 50 positions**
fully automatic quantitative and qualitative measurement for 50 samples in less than 2 min

 top


Fibre coupling
Fiber coupling with transmission immersion probes and fiber adapter
For measurements outside the sample compartment
SMA coupling
Allows connection of optical fiber with SMA plug for analyses outside the sample compartment

ATR - Probes
are suitable for situations involving the direct mesurement of strongly absorbing solutions. This probe is using 3 bounce sapphire ATR crystals, which are directly immersed into the solution to be measured

 top


Sample feeding
Cassette sipper system
For the analysis of liquid samples in continuous flow without change of sample cell
xyz-autosampler with sample tray for 53 or 100 samples ( optional )
For fully automatic analysis

 top


Dissolution
SPECORD® - Dissolution 
All SPECORD® double beam systems and the SPECORD® S 600 are available as special version for dissolution
                                               

 top


Validation Kit

Kits for validating the spectrophotometer provide problem-free manual or fully automatic validation procedures with the specified filter systems, including to Ph. Eur. specifications.

                                              


*

 for SPECORD® 200 series and SPECORD® S 600/S 300
** for SPECORD® S 600/S 300


 back top

Legal reference | Imprint